How to build and install a privacy panel fence - from diynetwork
This fence is made using 4x4 posts and "Five quarter" treated boards (12' x 6"). The full instructions include 'getting started', digging the post holes, making the pickets, assembling the panels, installing the panels and putting it all together. There are plenty of pictures. Enter >>>

How to make a pipe and chain-link mesh fence - from buildeazy
This is a good description of how a 3ft high (900mm) pipe and mesh fence was made. Enter >>>

How to Build Wood Fences - from doityourself.com
Here are some suggestions on how to build wood fences. These ideas can save you time, money and effort. This article covers the basics of fencing along with a few variations. Enter >>>

How to build and install a Wood Picket Fence - from ask the builder
To build a wood picket fence, you should first plan for post placement and gates. Check the zoning laws to see if they permit picket fences. Pre-cut and pre-treat your wood pickets before installing. It will save you time during the installation and will keep your wood picket fence looking newer for longer. Enter >>>

How to build a (6ft) high vertical board fence - from buildeazy
This article includes: Materials and post installation; Installing the Fence Posts; Fixing the rails and fence boards; Enter >>>

How to build a (6ft) board and lattice fence - from buildeazy
'Determine the fence line and mark it out with a string line. Continue the string line 600mm (2ft) past each end of the fence line and tie each end to stakes hammered into the ground. Ensure the string line is taut and not touching the ground at any part'. Enter >>>