|
Step 2. Fix the top rail to the tabletop
2a) Screw the fillets to the top rails, ensuring that the fillets are flush with the tops of the rails.
You will need to pre-drill the screw holes in the fillets for both the screws which go into the top rail and also for the screws which
will go into the tabletop.
Use the plans
in the previous page for reference.
2b) Position the rails on the under-side of the tabletop. Everything is upside-down at this stage. (See picture.)
2c) Screw the top rails to the tabletop through the pre-drilled holes in the fillets. (See picture.)
|
|
