Step 1. Cut the pieces to length

Cut all the Adirondack chair pieces to the lengths as given in the cutting list on the previous page.

The seat slats [g] will have to be ripped (cut lengthways) out of 140mm x 20mm (3/4" x 5 1/2") stock using a circular power saw or bench saw.

Step 2. Shape the chair frames

Make a card pattern for the Adirondack chair frames using the grid below.

How to make a card pattern using a grid
Each grid is in increments of 25mm or 1" squares so you can work in either metric dimensions or inches.

1) Cut a piece of card bigger than the required piece of wood.
2) On the card draw horizontal and vertical lines 25mm or 1" apart making a grid with 25mm or 1" squares.
3) Using the grid plan below as reference, draw the same outline shape onto the card using the same crossing points on the card grid as on the plan grid.
4) Cut out the outline shape on the card and use that as a pattern for the wood.